fstab — static information about the filesystems




The file fstab contains descriptive information about the various file systems. fstab is only read by programs, and not written; it is the duty of the system administrator to properly create and maintain this file. Each filesystem is described on a separate line; fields on each line are separated by tabs or spaces. Lines starting with '#' are comments, blank lines are ignored. The order of records in fstab is important because fsck(8), mount(8), and umount(8) sequentially iterate through fstab doing their thing.

The first field (fs_spec).

This field describes the block special device or remote filesystem to be mounted.

For ordinary mounts it will hold (a link to) a block special device node (as created by mknod(8)) for the device to be mounted, like `/dev/cdrom' or `/dev/sdb7'. For NFS mounts one will have <host>:<dir>, e.g., `'. For procfs, use `proc'.

Instead of giving the device explicitly, one may indicate the filesystem that is to be mounted by its UUID or LABEL (cf. e2label(8) or xfs_admin(8)), writing LABEL=<label> or UUID=<uuid>, e.g., `LABEL=Boot' or `UUID=3e6be9de-8139-11d1-9106-a43f08d823a6'.

It's also possible to use PARTUUID= and PARTLABEL=. These partitions identifiers are supported for GUID Partition Table (GPT) and MAC partition table only.

See blkid(8) or lsblk(8) for more details about devices identifiers.

Note that mount(8) uses UUIDs as strings. The string representation of the UUID should be based on lower case characters.

The second field (fs_file).

This field describes the mount point for the filesystem. For swap partitions, this field should be specified as `none'. If the name of the mount point contains spaces these can be escaped as `\040'.

The third field (fs_vfstype).

This field describes the type of the filesystem. Linux supports lots of filesystem types, such as adfs, affs, autofs, coda, coherent, cramfs, devpts, efs, ext2, ext3, hfs, hpfs, iso9660, jfs, minix, msdos, ncpfs, nfs, ntfs, proc, qnx4, reiserfs, romfs, smbfs, sysv, tmpfs, udf, ufs, umsdos, vfat, xenix, xfs, and possibly others. For more details, see mount(8).

For the filesystems currently supported by the running kernel, see /proc/filesystems.

An entry swap denotes a file or partition to be used for swapping, cf. swapon(8). An entry none is useful for bind or move mounts.

mount(8) and umount(8) support filesystem subtypes. The subtype is defined by '.subtype' suffix. For example 'fuse.sshfs'. It's recommended to use subtype notation rather than add any prefix to the first fstab field (for example '' is deprecated).

The fourth field (fs_mntops).

This field describes the mount options associated with the filesystem.

It is formatted as a comma separated list of options. It contains at least the type of mount plus any additional options appropriate to the filesystem type. For documentation on the available mount options, see mount(8). For documentation on the available swap options, see swapon(8).

Basic file system independent options are:


use default options: rw, suid, dev, exec, auto, nouser, and async.


do not mount when "mount -a" is given (e.g., at boot time)


allow a user to mount


allow device owner to mount


or x-<name> for use by fstab-maintaining programs


do not report errors for this device if it does not exist.

The fifth field (fs_freq).

This field is used for these filesystems by the dump(8) command to determine which filesystems need to be dumped. If the fifth field is not present, a value of zero is returned and dump will assume that the filesystem does not need to be dumped.

The sixth field (fs_passno).

This field is used by the fsck(8) program to determine the order in which filesystem checks are done at reboot time. The root filesystem should be specified with a fs_passno of 1, and other filesystems should have a fs_passno of 2. Filesystems within a drive will be checked sequentially, but filesystems on different drives will be checked at the same time to utilize parallelism available in the hardware. If the sixth field is not present or zero, a value of zero is returned and fsck will assume that the filesystem does not need to be checked.


The proper way to read records from fstab is to use the routines getmntent(3) or libmount.

The keyword ignore as filesystem type (3rd field) is not more supported by the pure libmount based mount utility (since util-linux v2.22).


/etc/fstab, <fstab.h>


findmnt(8), mount(8), swapon(8), fs(5), getmntent(3)


The ancestor of this fstab file format appeared in 4.0BSD.


This man page is part of the util-linux package and is available from

  Copyright (c) 1980, 1989, 1991 The Regents of the University of California.
All rights reserved.

Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
are met:
1. Redistributions of source code must retain the above copyright
   notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright
   notice, this list of conditions and the following disclaimer in the
   documentation and/or other materials provided with the distribution.
3. All advertising materials mentioning features or use of this software
   must display the following acknowledgement:
This product includes software developed by the University of
California, Berkeley and its contributors.
4. Neither the name of the University nor the names of its contributors
   may be used to endorse or promote products derived from this software
   without specific prior written permission.


    (#)fstab.5 6.5 (Berkeley) 5/10/91

Modified Sat Mar  6 20:45:03 1993,, for Linux
Sat Oct  9 10:07:10 1993: converted to man format by
Sat Nov 20 20:47:38 1993: hpfs documentation added
Sat Nov 27 20:23:32 1993: Updated authorship information
Wed Jul 26 00:00:00 1995: Updated some nfs stuff,
Tue Apr  2 00:38:28 1996: added info about "noauto", "user", etc.
Tue Jun 15 20:02:18 1999: added LABEL and UUID
Sat Jul 14 2001: Michael K. Johnson <> added -O